How To Unlock A Ge Microwave

There are a couple of door problems GE microwave owners are familiar with. Today, we are going to talk about these GE microwave door bug and how to prepare them.

How to Replace a GE Microwave Door Handle

To replace a GE microwave door handle, follow these steps…

Footstep 1: Unplug the microwave.

Stride two: Open the door of the microwave and pry out the trim around the door.

Pace three: Now take out the two screws which hold the door handle in place.

Step 4: Remove the old door handle.

Footstep 5: Get a new door handle and position it on the door.

Step vi: Hold the door handle in identify with the two screws.

Stride vii: Realign the trim on the door and snap it into place.

Step 8: Close the door and plug the microwave back in.

The video below will show you how to supersede a GE microwave door handle.

Why Does My GE Microwave Turn On When I Open the Door

If your GE microwave runs when the door is open, one of the door switches is faulty. To replace a GE microwave door switch do the following…

Step i: Unplug the microwave.

Step 2: Take out the screws which agree the microwave front vent in identify.

Step three: Open the door of the microwave then slide the vent to the left side to take it out.

Footstep 4: Take out the two screws property the command console in place. There will exist i screw at the left side of the control panel and another one behind it.

Footstep 5: Elevator the control console up to disassemble it from the microwave.

Step 6: Accept out the 2 screws which hold the door switch holder to the frame.

Step seven: Take out the door switch holder.

Step eight: To determine which of the switches is faulty, press the little push on each one. If in that location is a strong click when you do and then, the door switch is still good. Just if the button feels loose, go a replacement switch.

Stride 9: Take the door switch out of the holder.

Step 10: Disconnect the wires from it.

Step eleven: Connect the wires to the new door switch.

Footstep 12: Place the door switch back on the holder.

Step 13: Align the holder on the microwave frame and secure it with the screws.

Pace 14: Lift the control panel upwardly and push button it back into place.

Step fifteen: Utilise the ii screws to secure the panel.

Step 16: Return the forepart vent and the screws at the height.

Step 17: Shut the microwave door and plug it back in.

Watch the video below for a visual of how to replace a faulty GE microwave door switch.

How to Fix GE Microwave Door Latch

To fix a GE microwave door latch, do the following…

Step 1: Unplug the microwave from the outlet.

Step two: Open up the GE microwave door.

Step 3: Pry off the frame effectually the door. Practice not utilise a knife to do this.

Step iv: The latch volition be at the left. Pry the latch out.

Step five: Get a new door latch.

Footstep 6: Hook the leap to the new door latch.

Footstep 7: Reattach the hooks on the latch to the door.

Stride viii: Snap the door frame dorsum into place.

Step nine: Close the microwave door.

Step x: Plug the microwave back in.

The video below will bear witness you how to repair a GE microwave door latch.

GE Microwave Buzzing When Door Is Closed

If your GE microwave is buzzing with the door closed, the magnetron is most probable the faulty component. To test and supervene upon the magnetron in a GE microwave, do the post-obit…

Step 1: Plow off and unplug your microwave.

Step 2: Open the cabinet door.

Step 3: Have out the bolts which secure the microwave to the cabinet. Have an assistant support the microwave as you do this.

Stride 4: Tilt the microwave forward and pull the ability string through the hole in the chiffonier.

Step 5: Elevator the microwave off of the mounting plate on the wall.

Step six: Place the microwave on a apartment and sturdy surface lined with a fabric.

Step vii: Take out the screws at the securing the front grille. At that place volition exist two or three at the top.

Pace 8: Open the microwave door and take out the grille.

Step 9: Likewise remove the glass tray and support if they are still within.

Step ten: Close the microwave door.

Step 11: Rest the microwave on its back and accept out all the screws securing the bottom console.

Pace 12: Disconnect the wire harness and remove the wires from the retainer.

Step xiii: Set the bottom panel aside.

Step fourteen: Plough the microwave to sit on the bottom.

Step 15: Have out all the screws at the peak, sides, and back which hold the microwave comprehend in place.

Footstep 16: Remove the microwave encompass.

Step 17: Belch the capacitor by placing a pair of needle nose pliers on the 2 terminals of the capacitor simultaneously. Brand sure non to touch the metal portion of the pliers when you practice this.

Step xviii: Disconnect the wire connector continued to the magnetron.

Stride xix: Take out the screws which hold the magnetron to the frame.

Step 20: Disconnect the thermoprotector wires.

Step 21: Take out the screws holding the thermoprotector to the magnetron.

Step 22: Exam the magnetron for continuity using a multimeter. If there is no continuity, the magnetron is faulty. Click here to know how to test a magnetron for continuity using a multimeter.

Step 23: Get a new magnetron and screw the thermoprotector to it.

Step 24: Reconnect the wires to the thermoprotector.

Step 25: Align the microwave on the frame and hold information technology in place with the screws.

Footstep 26: Reconnect the wire connector to the magnetron.

Footstep 27: Make sure the power cord is hooked in the frame.

Step 28: Reposition the microwave cover and secure with all the screws.

Pace 29: Lay the microwave on its back and return the bottom console.

Step 30: Reconnect the wire harness and secure information technology in the retainer.

Footstep twoscore: Secure the bottom panel with the screws.

Pace 41: Return the front end grille and the screws at the top.

Step 42: Sit the microwave back on the mounting plate.

Step 43: Laissez passer the ability cord through the hole in the chiffonier.

Step 44: Secure the microwave to the cabinet using the bolts.

Step 45: Return the microwave glass tray and back up.

Pace 46: Plug the microwave back in.

The video below is going to walk y'all through how to replace a GE microwave magnetron.

Cheque out these articles…

GE Microwave Light [How To/Issues & Solutions]

GE Microwave Won't Plow On/Off [Solutions]

Frigidaire Microwave Door [Issues & Solutions]

How to Install a Frigidaire Microwave… [Detailed Guide]

Frigidaire Microwave Turntable [Issues & Solutions]

How To Clean a Frigidaire Microwave [Detailed Guide]

Frigidaire Microwave Is Making Noise/Sound [Solutions]

GE Microwave Tripping Breaker When Door Is Opened

If your GE microwave trips the breaker when the door is opened, information technology is near likely considering of a faulty door switch. To replace a GE microwave door switch, follow the steps listed beneath…

Footstep 1: Unplug your microwave.

Step 2: Have out the screws which hold the microwave front grille in place. Depending on the model of your microwave, in that location will exist 2 or three screws.

Stride 3: Open the GE microwave door.

Pace 4: Slide the front grille to the left so remove information technology.

Pace five: Take out the spiral at the left side of the control console. Likewise have out the other screw behind it.

Step 6: Lift the control panel up then lower it down.

Stride 7: Have out the screws securing the door switch holder to the frame.

Stride 8: Detach the upper door switch from the holder.

Step nine: To make up one's mind if the door switch is faulty or not, printing the small push on it. If at that place is a strong click, render information technology. However, if the button feels loose, information technology is faulty.

Step ten: Do this same test with the other door switches to determine which 1 is faulty.

Step xi: Get a new door switch.

Stride 12: Disconnect the wires from the faulty door switch and connect them to the new 1.

Footstep 13: Identify the door switch dorsum in the holder.

Step 14: Align the holder on the frame and secure it with the screws.

Step 15: Push button the control panel back in and render the spiral behind it and the other one at the side.

Footstep 16: Return the front grille and the screws at the meridian.

Step 17: Plug the microwave back in.

The video below will prove you how to supplant a GE microwave door switch step by step.